| Content | FEATURES:
- BSS® overheating protection
- Patented electronic temperature regulation
- Automatic switch off after approx. 3 hours
- Illuminated function display
- Plug and socket
- 150 watt
| SPECIFICATIONS:
|
utput channel
|
2 channels independently controlled.
|
|
Output wave form
|
By Selecting combination of rectangular pluses following 3
|
|
Kinds Modes is outputted
|
|
Constant mode
|
2Hz- 200Hz of basic wave form
|
|
Burst Mode
|
Repetition of 2 groups of 10 pulses per second.
|
|
Modulation Mode
|
Repetition of 2 seconds “on” 1 Second “Off”
|
|
Output current
|
Less than 20.0 mA ( 5000Ω load)
|
|
Pulse width
|
50 – 200 ṷ S
|
|
Frequency
|
2- 200Hz ( Variable )
|
|
Output Mode TENS
|
Constant, Burst And Modulation
|
|
Rated Consumption electric current
|
Less than115mA
|
|
Classification
|
internally powered equipment
|
|
Type FB
|
|
Environmental condition :
|
In use
|
Storage / Transportaion
|
|
Temperature
|
10- 40Ċ
|
-10-60 Ċ
|
|
Humidity
|
30 – 75 %
|
30 95%
|
|
Barometric pressure
|
700-1060hpa
|
700-1060hpa
|
|
Power souce
|
:DC 9v battery
|
|
Conformity
|
CE (MDD )
|
|
Size
|
96mm (H) x 61 mm (w) x 27mm (D)
|
|
Weight
|
120 gr. Excluding a battery
|
|
Specifications and designs are subject to change without prior notice.
|
| FEATURES:
- Versatile Application: lateral position, abdomen, back, neck roll, knee pads …
- Additional cotton cover for use in the bed – washable at 60 ° C
- Cuddle skin-friendly fabric – fully washable at 40 ° C gentle cycle
- Removable cord
- 3 temperature settings
- Automatic shut-off after about 90 minutes
- 100 Watt
- Electronic temperature control
- BSS ® overheating protection
- Size role: about 20 cm diameter, 90 cm length
| DESCRIPTION:
- The Premier TENS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups.
- This unit is a TENS used for pain relief.
- The device is provided with two controllable output channels, each independent of the other.
- A pair of electrodes can be connected to each output channel.
- The intensity level and settings are controlled by press buttons.
|
|
MECHANISM
|
TECHICAL DESCRIPTION
|
|
01
|
Channel
|
Dual, isolated between channels
|
|
02
|
Pulse Amplitude
|
Adjustable, 0-110 mA peak into 500 ohm load each channel.
|
|
03
|
Wave Form
|
Asymmetrical Bi-Phasic Square Pulse
|
|
04
|
Voltage
|
0 to 55V (Load: 500 ohm)
|
|
05
|
Power source
|
One 9 Volt Battery.
|
|
06
|
Size
|
11.8cm(L) x 6 cm(W) x 3.1cm(H)
|
|
07
|
Weight
|
157 grams with battery.
|
|
08
|
Pulse Rate
|
Adjustable, from 2 to 150 Hz, 1 Hz/step
|
|
09
|
Pulse Width
|
Adjustable, from 50 to 300 microseconds, 10 µs/step
|
|
10
|
Mode
|
Five TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width)
|
|
11
|
Burst Mode
|
Burst rate: Adjustable, 0.5 ~ 5Hz
Pulse width adjustable, 50~300 µs
Frequency fixed = 100 Hz
|
|
12
|
Normal Mode
|
The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
|
|
13
|
Modulation Mode
|
Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable.
|
|
14
|
S1 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
|
15
|
S2 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
|
16
|
Timer
|
Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.
|
|
17
|
Patient
Compliance Meter
|
This unit can store 60 sets of operation records. Total recorded time is 999 hours.
|
|
18
|
Low Battery Indicator
|
A low battery indicator will show up when the battery is low.
|
|
19
|
Operating Condition
|
Temperature:0°-40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa
|
|
20
|
Remark
|
There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.
|
|
|
|
| FEATURES:
- Cosy and soft heating pad made of cosy micro-fibre cover
- Breathable, cosy and skinfriendly
- XXL giant heating pad approx. 60 x 40 cm
- Innovative button switch with LED lights
- Detachable control unit
- Machine-washable at 30 °C
- BSS® overheating protection
- 6 temperature settings
- Illuminated function display
- Automatic switch-off function after approx. 90 minutes
- Fast heating
- Removable and washable cosy micro fibre cover
- 100 watt
| DESCRIPTION:
- 4 self-adhesive electrodes (2 separately adjustable channels)
- 30 pre-programmed applications (TENS/EMS/massage)
- Treatment time adjustable (5 - 90 minutes)
- 20 individualized programs (TENS/EMS)
- 3 in 1: TENS (nerves, pain), EMS (muscle), massage (relaxation)
- "Doctor´s-Function: for ideal coordination with your personal therapy program
- Background illuminated, easy-to-read display
- Safety switch-off
- Ergonomic design
- Output current: max. 180 mA p-p (500 Ohm)
- Output frequency: 1 - 120 Hz
- Pulse width: 40 - 250 µs per phase
- Medical product
|
Reviews
There are no reviews yet.