| Content | FEATURES:
- Soothing warmth relieves tired, aching muscles and temporary arthritic pain.
- Besmed heating pads are versatile and light weight, comfortable to use.
- Use them on most parts of the body, arms legs, shoulders, back abdomen, elbows, knees, ankles.
- Absorbent sponge provides penetrating moist heat.
- Soft cover with tie bands to hold the heating pad in place.
- Removable, washable cover with snap closure.
- 100% moisture-proof, vinyl covered pad.
SPECIFICATIONS:
|
Model
|
BE-220
|
|
Size
|
30x60cm
|
|
Heat type
|
Dry/moist
|
|
Voltage
|
110v & 220v
|
| FEATURES:
- BSS® overheating protection
- Hand washable
- 3 temperature settings
- Illuminated switching positions
- Topside: cotton, Underside: fleece
- Approx. 150 x 80 cm
- 60 watt
| DESCRIPTION:
- Model #: EV-805
- The Comfy EMS®has 3 output modes of options including Constant, Synchronous and Alternate. Wide ranges of parameters controlled by press buttons are very convenient for the physical therapist to create a new program.
- Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load
- Wave Form: Asymmetrical Bi-Phasic Square Pulse
- Size: 10.1cm(L) x 6.1cm(W) x 2.45cm(H)
- Weight: 150 grams with battery.
- On Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Weight: 150 grams (battery included)
- Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step.
- On Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Off Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Pulse Rate: Adjustable, 2~150 Hz , 1Hz / step
- Pulse Width: Adjustable, 50~300µs , 10us / step
- Timer: Adjustable, 5-60 minutes or Continue. Adjustable in 5 minutes each step.
- Output Mode: 3 modes, Constant ,Synchronous, Alternate
FEATURES:
- Flip top cover
- 3 modes of option
- Protective strips on both sides of unit
- Large LCD showing all settings
- Easy to use press buttons control
- Simple directions for use inside the cover
- Patient compliance meter up to 999 hours
- Storage of the last used settings
- Easy to open swing cover
- Unbreakable, stainless steel belt clip
- Treatment time countdown
- Low battery indicator
| DESCRIPTION:
- The Premier TENS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups.
- This unit is a TENS used for pain relief.
- The device is provided with two controllable output channels, each independent of the other.
- A pair of electrodes can be connected to each output channel.
- The intensity level and settings are controlled by press buttons.
|
|
MECHANISM
|
TECHICAL DESCRIPTION
|
|
01
|
Channel
|
Dual, isolated between channels
|
|
02
|
Pulse Amplitude
|
Adjustable, 0-110 mA peak into 500 ohm load each channel.
|
|
03
|
Wave Form
|
Asymmetrical Bi-Phasic Square Pulse
|
|
04
|
Voltage
|
0 to 55V (Load: 500 ohm)
|
|
05
|
Power source
|
One 9 Volt Battery.
|
|
06
|
Size
|
11.8cm(L) x 6 cm(W) x 3.1cm(H)
|
|
07
|
Weight
|
157 grams with battery.
|
|
08
|
Pulse Rate
|
Adjustable, from 2 to 150 Hz, 1 Hz/step
|
|
09
|
Pulse Width
|
Adjustable, from 50 to 300 microseconds, 10 µs/step
|
|
10
|
Mode
|
Five TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width)
|
|
11
|
Burst Mode
|
Burst rate: Adjustable, 0.5 ~ 5Hz
Pulse width adjustable, 50~300 µs
Frequency fixed = 100 Hz
|
|
12
|
Normal Mode
|
The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
|
|
13
|
Modulation Mode
|
Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable.
|
|
14
|
S1 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
|
15
|
S2 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
|
16
|
Timer
|
Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.
|
|
17
|
Patient
Compliance Meter
|
This unit can store 60 sets of operation records. Total recorded time is 999 hours.
|
|
18
|
Low Battery Indicator
|
A low battery indicator will show up when the battery is low.
|
|
19
|
Operating Condition
|
Temperature:0°-40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa
|
|
20
|
Remark
|
There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.
|
|
|
|
| FEATURES:
- BSS® overheating protection
- Patented electronic temperature regulation
- Automatic switch off after approx. 3 hours
- Illuminated function display
- Plug and socket
- 150 watt
| |
Reviews
There are no reviews yet.