CON-TREX® LP PHYSIOMED GERMANY

0

1 in stock

Category:
Description

Description

Description
 

The CON-TREX® LP leg press is a testing and training machine for the entire leg extensor and flexor chain. It can provide metered, measurable forces from a few N to 6000 N at speeds of up to 1 m/sec. Separate footplates allow unilateral training (on the left or right), bilateral training, or alternating mode. The adjustable footplate fixtures can be varied for selective testing and improvement of ankle joint stability. The backrest can be lowered right down into a horizontal position at any time. The robust processed cushions made of synthetic leather offer a maximum of comfortable seating even during long training sessions and are easy to clean.

 
 

The high level of precision of the metered, measurable forces and the exceptional properties of the motion monitor through the drive system produce an extremely versatile area of application on a minimum workspace of just 1.8 x 2.5 meters including the control module.

Due to the functional motion, the entire muscle chain of the lower limbs is strengthened, while coordination is simultaneously improved and joint stability increased. The optimally adjusted load and strain of the (atrophied) musculature beyond the entire radius of motion can bring about a very sharp increase in the muscle strength and a significant improvement to coordination. All of this occurs without any excessive strain on the joint, especially in physiologically awkward positions.

CON-TREX® LP facilitates working with all movement modes and load types: isokinetic, isometric, isotonic, in continuous passive motion (CPM) and with freely definable position profiles.

In its ballistic mode, CON-TREX® has a one-of-a-kind control system. Here, in order to compensate for the inertia of moving body parts, the expected motional development is calculated beforehand and the generated “inner strength” is continuously equalised. To this user this means the following: the motion can be executed functionally, realistically and for a longer period at the desired target speed – particularly with minimal effort, at high motion speeds or when large body segments are being moved. CON-TREX®’s ballistic mode enables both isokinetic and isotonic work.

Another advantage is the active compensation for gravitational force during training and diagnosis. Patients with little strength are often unable to move individual segments of their bodies without assistance. This means that active compensation for these static weight influences is required. While the movement is being performed, the dynamometer can continuously reduce the external forces or even compensate them completely; this produces a “gravity-free”’ situation for the patient where every movement can be performed with minimal expenditure of force.

CON-TREX® software also offers the option of merely measuring the forces acting on the movement, without active compensation. When evaluating data, the measured values can then be displayed as “gravity-corrected”.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CON-TREX® LP PHYSIOMED GERMANY”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCON-TREX® LP PHYSIOMED GERMANY removeWalker For Children (Aluminium removeSPINE BOARD - YXH-1A6D removeTREATMENT TABLE ELECTRIC - EL03 removeRubber Tip For Wheelchair (Set of 4) removeSTRETCHER FOR AMBULANCE - YXH-2A remove
NameCON-TREX® LP PHYSIOMED GERMANY removeWalker For Children (Aluminium removeSPINE BOARD - YXH-1A6D removeTREATMENT TABLE ELECTRIC - EL03 removeRubber Tip For Wheelchair (Set of 4) removeSTRETCHER FOR AMBULANCE - YXH-2A remove
Image
SKU
Rating
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Rated 0 out of 5
Price05,070005000
Stock

1 in stock

1 in stock

1 in stock

Out of stock

1 in stock

Availability1 in stock1 in stock1 in stockOut of stock1 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
Content
Description
 

The CON-TREX® LP leg press is a testing and training machine for the entire leg extensor and flexor chain. It can provide metered, measurable forces from a few N to 6000 N at speeds of up to 1 m/sec. Separate footplates allow unilateral training (on the left or right), bilateral training, or alternating mode. The adjustable footplate fixtures can be varied for selective testing and improvement of ankle joint stability. The backrest can be lowered right down into a horizontal position at any time. The robust processed cushions made of synthetic leather offer a maximum of comfortable seating even during long training sessions and are easy to clean.

 
 

The high level of precision of the metered, measurable forces and the exceptional properties of the motion monitor through the drive system produce an extremely versatile area of application on a minimum workspace of just 1.8 x 2.5 meters including the control module.

Due to the functional motion, the entire muscle chain of the lower limbs is strengthened, while coordination is simultaneously improved and joint stability increased. The optimally adjusted load and strain of the (atrophied) musculature beyond the entire radius of motion can bring about a very sharp increase in the muscle strength and a significant improvement to coordination. All of this occurs without any excessive strain on the joint, especially in physiologically awkward positions.

CON-TREX® LP facilitates working with all movement modes and load types: isokinetic, isometric, isotonic, in continuous passive motion (CPM) and with freely definable position profiles.

In its ballistic mode, CON-TREX® has a one-of-a-kind control system. Here, in order to compensate for the inertia of moving body parts, the expected motional development is calculated beforehand and the generated "inner strength" is continuously equalised. To this user this means the following: the motion can be executed functionally, realistically and for a longer period at the desired target speed – particularly with minimal effort, at high motion speeds or when large body segments are being moved. CON-TREX®'s ballistic mode enables both isokinetic and isotonic work.

Another advantage is the active compensation for gravitational force during training and diagnosis. Patients with little strength are often unable to move individual segments of their bodies without assistance. This means that active compensation for these static weight influences is required. While the movement is being performed, the dynamometer can continuously reduce the external forces or even compensate them completely; this produces a "gravity-free"’ situation for the patient where every movement can be performed with minimal expenditure of force.

CON-TREX® software also offers the option of merely measuring the forces acting on the movement, without active compensation. When evaluating data, the measured values can then be displayed as "gravity-corrected".
KY966L Aluminum Pedia Walker gives recovering patients or little children support and security to walk distances without the help of another person. By using this walker, their confidence in themselves will be increased as they practice to rely on their own strength and capabilities. Features: 
  • Made of aluminum, so it's lightweight and will not rust
  • Folding, so it easily fits into compact spaces and is convenient to carry around
  • Adjustable height, with a simple push of a button on the four legs (52-62cm)
  • Made in China

DESCRIPTION:

  • Spine board is commonly used for safely transporting seriously injured and immobile.
  • It can float on water, allowed X-rays and also used together with head immobilizer.
  • Made of high strength engineering plastic, this spine board is enduring, anti-aging, weight loading and easy for storage.
  • It is a must have in first-aid equipment for medical centers.

 

SPECIFICATION:

  • Spine Board. Model YXH-1A6D
  • Product Size: 184*41*5cm (L*W*H)
  • Packing Size (1pcs): 186*43*7cm
  • Loading Bearing: ≤159kg
  • N.W.: 6.5KG
  • G.W.: 8KG

SPECIFICATION

  • "Tmotion" brands motor for High-Low.
  • Height control by foot switch.
  • Adjustable head section featuring single gas strut, angle adjustable from +40° to -50°.
  • Adjustable backrest featuring double stainless steel struts, angle adjustable from 0 to + 60o.
  • Able to lift up to 225kg working weight from its lowest height.
  • Wheels 5cm diameter.
  • Retractable castors50mmfor excellent mobility and safety.
  • Fire/stain/mildew/oil/water/wear resistant Med PVC available in 9 kinds of colors.
  • Table goes horizontal for people recovery in emergency situations.
  • Certificates: CE, FDA, ISO9001-2008, ISO13485-2007.
  • DIMENSIONS:
    • Head section Length: 39cm
    • Middle section Length: 53cm
    • Back Section Length: 94cm
    • Upholstery Width: 66cm
    • Adjustable Height: 50cm – 90cm
    • Foam Thickness: 5cm
    • Foam Density: 36g/m2
    • Open: 193 x 66 x (50-90)cm
  • Packing: 186 x 72 x 56cm (Heavy carton)
Rubber Tip For Chinese walking frames and walking sticks.

DESCRIPTION:

  • This ambulance stretcher is low frame structure model, it is made of high-strength aluminum alloy thick-wall pipes.
  • The bed surface is made of foamed cushion and the adjustable back, making the wounded feel comfortable.
  • This machine is very convenient; one person is enough to send the patient (with this stretcher) to the ambulance car.
  • The folding legs are controlled by the handles on both ends of the stretcher.
  • This type of stretcher is characterized by its light weight, safe usage and easy for sterilization.

 

SPECIFICATION:

  • Stretcher for Ambulance. Model YXH-2A
  • High Position: 190*55*50cm (L*W*H)
  • Maximum Angle: 75°
  • Packing Size (1pcs): 195*62*34cm
  • Loading Bearing: ≤159kg
  • N.W.: 25.5kg
  • G.W.: 31.5kg
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information