Content | DESCRIPTION:
- The Premier TENS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups.
- This unit is a TENS used for pain relief.
- The device is provided with two controllable output channels, each independent of the other.
- A pair of electrodes can be connected to each output channel.
- The intensity level and settings are controlled by press buttons.
|
MECHANISM
|
TECHICAL DESCRIPTION
|
01
|
Channel
|
Dual, isolated between channels
|
02
|
Pulse Amplitude
|
Adjustable, 0-110 mA peak into 500 ohm load each channel.
|
03
|
Wave Form
|
Asymmetrical Bi-Phasic Square Pulse
|
04
|
Voltage
|
0 to 55V (Load: 500 ohm)
|
05
|
Power source
|
One 9 Volt Battery.
|
06
|
Size
|
11.8cm(L) x 6 cm(W) x 3.1cm(H)
|
07
|
Weight
|
157 grams with battery.
|
08
|
Pulse Rate
|
Adjustable, from 2 to 150 Hz, 1 Hz/step
|
09
|
Pulse Width
|
Adjustable, from 50 to 300 microseconds, 10 µs/step
|
10
|
Mode
|
Five TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width)
|
11
|
Burst Mode
|
Burst rate: Adjustable, 0.5 ~ 5Hz
Pulse width adjustable, 50~300 µs
Frequency fixed = 100 Hz
|
12
|
Normal Mode
|
The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
|
13
|
Modulation Mode
|
Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable.
|
14
|
S1 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
15
|
S2 Mode
|
Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.
|
16
|
Timer
|
Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.
|
17
|
Patient
Compliance Meter
|
This unit can store 60 sets of operation records. Total recorded time is 999 hours.
|
18
|
Low Battery Indicator
|
A low battery indicator will show up when the battery is low.
|
19
|
Operating Condition
|
Temperature:0°-40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa
|
20
|
Remark
|
There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.
|
|
|
|
| DESCRIPTION :
- 3 in 1: TENS (nerves, pain), EMS (muscle), massage (relaxation)
- 4 separately adjustable channels with 8 self-adhesive electrodes
- 30 pre-programmed applications (TENS/EMS/massage)
- 20 free programmable programs (TENS/EMS): Frequency, pulse width, on time, off time
- "Doctor´s-Function: for ideal coordination with your personal therapy program
- Treatment time adjustable (5 - 90 minutes)
- Background illuminated, easy-to-read display
- Ergonomic design
- Safety switch-off
- Output current: max. 180 mA p-p (500 Ohm)
- Output frequency: 1 - 120 Hz
- Pulse width: 40 - 250 µs per phase
- Pulse shape: biphasic square pulses
- With comprehensive instructions (incl. application options)
- Batteries included: 3 x AA
Functions:
- Transcutaneous electrical nerve stimulation (TENS) - medicine- and side effect-free pain-relief
- Electronic muscle stimulation (EMS) - for muscle training- and regeneration
- Massage - for relaxation and well-being
| TENS / EMS ComboES-320
What makes the ES-320 different?
The ES-320 is designed so practitioners can check whether the patient has used the unit as prescribed (PAT. P), or allows you to check the patient's usage, helping you make reliable evaluations on therapeutic effect based on the parameters specially set up for the patient.
Features
- Saves in memory the cumulative number of treatments and duration of treatment (PAT.P)
- Stores and protects programs formulated for each individual patient (PAT.P) — parameters programmed for specific patients are stored in dedicated memory for protection
- Comes with four separate free program memories (1 for each mode)
- Large, easy-to-read LCD monitor (46mm x 31mm)
- Color-coded, easy-to-use operational keys
- Stimulus-habituation prevention mode — Sweep and Random (sequential) modes
- Self-test — checks ROM/RAM when the power is turned on
- In surge (EMS) mode, operators can choose either co-cont or alternate-cont
- Auto power off — power turns off after 3 minutes unused
- Key lock — all keys except the lock key and power source key are locked
- Low battery warning
-
Specifications
Power supply |
DC 4.5 V, 3 x LR6 (AA) alkaline battery |
Number of channels |
2 |
Current amplitude (max.) |
90 mA (peak) |
Output mode |
Constant, Burst, Surge (EMS), Sweep, Random |
Safety class according to IEC 60601-1 |
Internally powered equipment, Type BF |
Dimensions |
61 (W) x 37 (D) x 122 (H) mm |
Weight |
120 g(without batteries) |
-
| | SPECIFICATIONS:
utput channel
|
2 channels independently controlled.
|
Output wave form
|
By Selecting combination of rectangular pluses following 3
|
Kinds Modes is outputted
|
Constant mode
|
2Hz- 200Hz of basic wave form
|
Burst Mode
|
Repetition of 2 groups of 10 pulses per second.
|
Modulation Mode
|
Repetition of 2 seconds “on” 1 Second “Off”
|
Output current
|
Less than 20.0 mA ( 5000Ω load)
|
Pulse width
|
50 – 200 ṷ S
|
Frequency
|
2- 200Hz ( Variable )
|
Output Mode TENS
|
Constant, Burst And Modulation
|
Rated Consumption electric current
|
Less than115mA
|
Classification
|
internally powered equipment
|
Type FB
|
Environmental condition :
|
In use
|
Storage / Transportaion
|
Temperature
|
10- 40Ċ
|
-10-60 Ċ
|
Humidity
|
30 – 75 %
|
30 95%
|
Barometric pressure
|
700-1060hpa
|
700-1060hpa
|
Power souce
|
:DC 9v battery
|
Conformity
|
CE (MDD )
|
Size
|
96mm (H) x 61 mm (w) x 27mm (D)
|
Weight
|
120 gr. Excluding a battery
|
Specifications and designs are subject to change without prior notice.
|
| DESCRIPTION:
- Model #: EV-805
- The Comfy EMS®has 3 output modes of options including Constant, Synchronous and Alternate. Wide ranges of parameters controlled by press buttons are very convenient for the physical therapist to create a new program.
- Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load
- Wave Form: Asymmetrical Bi-Phasic Square Pulse
- Size: 10.1cm(L) x 6.1cm(W) x 2.45cm(H)
- Weight: 150 grams with battery.
- On Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Weight: 150 grams (battery included)
- Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step.
- On Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Off Time: Adjustable, 2~90 seconds , 1 Sec./ step
- Pulse Rate: Adjustable, 2~150 Hz , 1Hz / step
- Pulse Width: Adjustable, 50~300µs , 10us / step
- Timer: Adjustable, 5-60 minutes or Continue. Adjustable in 5 minutes each step.
- Output Mode: 3 modes, Constant ,Synchronous, Alternate
FEATURES:
- Flip top cover
- 3 modes of option
- Protective strips on both sides of unit
- Large LCD showing all settings
- Easy to use press buttons control
- Simple directions for use inside the cover
- Patient compliance meter up to 999 hours
- Storage of the last used settings
- Easy to open swing cover
- Unbreakable, stainless steel belt clip
- Treatment time countdown
- Low battery indicator
|
Reviews
There are no reviews yet.